Victor Ampuero
11/19/2025, 9:37 PMsmartctl and it shows a very high amount of writes (11.6 PB in total).
How can I reduce disk writes? I thought that since TS is an in-memory DB, it shouldn’t generate so many disk writes.
Also, the pidstat -dl 20 command reports around 213675.16 kB_wr/s (it varies, but you get the idea).
Currently, I'm syncing about 3k items every 5 seconds.
----
=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: FAILED!
- NVM subsystem reliability has been degraded
SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x04
Temperature: 48 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 140%
Data Units Read: 3,298,109,870 [1.68 PB]
Data Units Written: 22,768,223,925 [11.6 PB]
Host Read Commands: 15,870,470,592
Host Write Commands: 22,956,431,236
Controller Busy Time: 196,312
Power Cycles: 22
Power On Hours: 22,456
Unsafe Shutdowns: 7
Media and Data Integrity Errors: 0
Error Information Log Entries: 0
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 1: 48 Celsius
Temperature Sensor 2: 59 Celsius
Error Information (NVMe Log 0x01, 16 of 64 entries)
No Errors LoggedAlan Martini
11/19/2025, 9:51 PMVictor Ampuero
11/19/2025, 10:01 PMAlan Martini
11/20/2025, 2:39 PM